**Cable Hook
Mining Cable Hook Mining Hook Cable Hook This product is made of high-strength injection molding and has the characteristics of corrosion resistance, anti-aging, high strength, long service life, good antistatic and flame retardant properties. Hooks of different specifications can be combined in any combination, easy to install, and suitable for hanging various cables. It can be widely used in erecting cables in mines, ground, tunnels and coal mines.
The mine cable hook can be used flexibly according to the number of cables at the installation point, which can save time, labor and effort when erecting, removing, adding and replacing cables. It is an extremely ideal erection accessory when erecting cables in mines.
Hook-type cable hooks can replace the traditional cable hooks and corresponding supports made of steel. They are suitable for erecting cables in mines, on the ground and in underground passages, especially for erecting cables under coal mines.
, light weight, large load-bearing capacity
The weight of a single unit is the maximum tensile force that a hook body of a steel product of the same volume can bear. The deflection of the straight rod section is less than that of the curved hook when it is loaded.
, Mining cable hooks have stable anti-static, anti-aging and flame-retardant properties
The arithmetic average of the surface resistance (anti-static) of the inner and outer walls of the hook is greater than *, and the flaming burning time (average) is less than seconds, no The flame burning timetable (average value) is less than seconds, the normal service life can reach years, and the appearance does not require anti-corrosion treatment and is not easy to discolor and embrittle.
, Mining cable hooks are easy to install and replace
The lightest single weight and small size make it easy to transport and move. The installation method is safe, simple and fast. No other auxiliary tools are needed when folding and assembling the hook. It can be used directly It can be operated by hand. When installing mining cable hooks, the number and specifications of the hooks can be flexibly increased or decreased according to the number of cables or pipes laid. The project cost is low, the labor intensity is low, and the efficiency is high. During maintenance and replacement, the single hook can be directly folded and installed. There is no need to disassemble other hooks and cables, and the number of hooks and cables can be increased or decreased at will.
The cable hook has a beautiful and firm appearance.
The hook is not easy to fall off after being assembled, and forms a straight line vertically up and down. It will not swing left or right, twist or deform. After the cable is laid, it will be neat, firm, beautiful and durable.
, Mining cable hooks are healthy and environmentally friendly
The raw materials of the hooks are non-toxic and harmless, and the materials can be recycled and reused.
The antistatic and flame retardant components of the flame retardant and antistatic hook are evenly distributed in the hook body, so the antistatic and flame retardant performance indicators will not be affected by the use time. The antistatic and flame retardant components of the mining cable hook The flammability properties comply with coal mining industry standards and are suitable for underground flammable and explosive workplaces.
It is light in weight and easy to install. When used in underground installation, it can not only reduce the labor intensity of workers and improve work efficiency, but also reduce the overall project cost.
Anti-aging and corrosion-resistant hooks have good anti-aging properties, are not easily brittle, have good toughness, and can absorb impact. Service life When the factory is used under normal conditions, the service life can reach years.
Installation and Precautions for Mining Cable Hooks
Mining Cable Hooks
) Choose a suitable cable hook according to the cable model and outer diameter. (limited to) is a hanging unit, each unit is hung with one or more cable hooks.
) When hanging, first pierce special bolts or other hanging parts to fix the hook on the well wall. When the hook is fixed, the arc-shaped hook hangs vertically. If multiple cables are suspended, a set of hooks must be used to hang them in series. The construction workers first connect two hooks in series on the ground, and then fix them according to the previous method.
) When two hooks are connected in series, first align the hanging hole of one hook with the hanging rod of the other hook, make the straight rod sections of the two hooks at right angles, press in hard, so that the hanging rod completely enters the hanging hole, and then hold The arc-shaped hook rotates so that the straight rod sections of the two hooks become ℃. The safety buckle of one hook just fits into the recess of the other hook.
) Only after confirming that the entire cable enters the arc hook can the construction worker release the cable.
Precautions for mining cable hooks
) The number of hooks that can be connected in series for each unit cannot easily exceed 1.
) In order to improve the suspension quality, the straight rod section of the hook should be close to the well closure when stationary. If this is not possible, the number of series connections should be appropriately reduced or the unit group should be increased.
) Construction workers are strictly prohibited from jumping in the air to quickly feed the cable into the arc hook, which may cause the arc hook to bear the weight of the cable plus the human body in an instant, causing breakage.
) Only after confirming that the entire cable enters the arc hook can the construction worker release the cable.
Advantages of mining cable hook products
High strength, able to withstand load for a long time
Good resilience, able to bend without deformation, while maintaining toughness and resisting repeated impacts
Resistance The self-lubricating property of grinding provides better working performance than bronze cast iron, carbon steel and phenolic laminate in oil-free (or de-oiled) lubrication applications, reducing consumption and saving energy
Noise absorption, shock absorption, composite material mold The amount is much smaller than that of metal, and the attenuation of vibration is greater, providing a practical way to prevent noise than metal
Compared with metal, composite materials have low hardness and will not damage the wear parts
Low coefficient, providing It may be widely used in friction parts
High chemical stability, resistant to alkali, alcohol, ether, hydrocarbons, weak acids, lubricants, detergents, water (seawater), and is odorless, non-toxic, The characteristics of odorless and rust-free provide excellent conditions for its wide application in mechanical parts such as alkali corrosion resistance, environmental protection and sanitation, food, textile printing and dyeing, etc.
Simplifying machine maintenance, saving labor, excellent mechanical cutting performance, and improving labor productivity.
The company has established a complete quality management system to ensure product quality. We will adhere to the concepts of scientific management, creating high-quality products, customer first, and high-quality service, and provide better mechanisms, scientific management, innovative design, advanced technology, reliable products, and high-quality services for the development and development of the coal industry. Scientific and technological progress services.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
GL-PVC78 GL-PVC100*220*131 cable hook