Coal shearer cable splint
Cable splint usage and scope of application This product is suitable for dragging cable clamps for various types of coal shearers using polymeric plastics and carbon steel plates as raw materials for fully mechanized mining and general mining units in coal mines. .
The main structure and working principle of the shearer cable clamp
The main structure of the cable clamp is composed of a shaped splint, a horizontal connecting plate and a connecting pin composed of a carbon steel frame wrapped in polymer plastic.
Working Principle This product is suspended and installed on the towing frame of the shearer and moves with the shearer. It mainly plays the role of protecting the cables and water pipes used in underground coal mining machines to prevent breakage and wear of the cables and water pipes.
The cable splints for coal shearers produced by the company are injection molded from nylon with flame retardant and antistatic agents added to the steel skeleton. According to the needs of the coal shearer working surface, they are connected through pins or bolts to protect cables or water pipes. aisle. It is light in weight, small in size, compact in structure, easy to install, simple to maintain and repair, has a long service life, and has high tensile strength and impact resistance. Its advantage is that the lined steel frame carries drag force and protects cables or water pipes from external forces. Flame retardant, antistatic and other additives are added to the nylon, which has flame retardant and antistatic effects. , Purpose and scope of application This product can be widely used in the towing device that constitutes the drum shearer to tow and protect the power supply cable and water inlet pipe. , product specifications and models. The cable clamps produced by our company are available in four types: type, type, type and type. Adjacent cable clamps of the same specification are easy to connect and can be extended arbitrarily according to the needs of the shearer working surface to protect the cable during the towing process. Or water pipes can work reliably without being broken or damaged, improving production efficiency and reducing maintenance and repair costs.
Model specifications Total width Inner cavity width Height Inner cavity height Pin hole center distance Pin hole diameter
br/> br/>
&
br/>
br/> br/> br/> br/> Appearance requirements of cable splints for shearers The surface should be smooth and flat, and the steel plate should not be exposed on the surface covered with non-metallic materials. After the cable splints are connected in series, they should be flexible to rotate and bend freely, and the bending angle should meet the requirements of the technical drawings. Basic dimensions require that the geometric dimensions of the cable splint should comply with the provisions of the table and processing drawings. The hole diameter tolerance is (/), the hole spacing limit deviation is / grade (/), and the dimensional tolerance is grade (/). The other dimensional tolerances are as follows: Note that dimensional tolerance level (/) is required for manufacturing (see Figure ~ Figure).
Impact resistance When the cable splint is tested according to the regulations in /, it should be able to withstand the smashing impact energy specified in the table. The cable splint should not break after bearing the impact. Maximum bending angle The maximum bending angle and its limit deviation of two adjacent cable splints shall comply with the provisions of the table, or shall be in accordance with the agreement between the supplier and the buyer.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
H type LJH100×145×100 shearer cable splint